Turbocharging – Before installation!

So you want to charge the turbocharger?

Turbochargers can be used for most vehicles. They are a terrific way to get more horsepower. Turbochargers compress air into the engine, enabling more air to fuel and horsepower.

"The Turbo Delay Before Foaming Before Acceleration When a Turbocharger Engine Goes to the Gas Accelerator." Turbo delay has physical reasons for turbocharger technology. Different designs and different conditions affect the degree of delays.

A car specializing in custom cars really takes time to examine your car. They will know the correct kit that matches the particular car. The turbo charged car is a serious alteration. The technician will know all the items that a car needs before installation. Most importantly, the shop explains what to do to keep your car in the top shape after installation. Before installing, make sure that the in-vehicle injector is sufficiently large to provide extra fuel. Also, know that the engine space provides enough room for installation. The technician will know more about what your car needs for the correct installation.

It is more important for you to find out how to take care of your car and how to secure the installation. Use the throttle valve for the second gear. Allow the engine to reach 60% of the speed. If the warning light does not light up, it will be ready. Check if there is smoke from the exhaust (it does not have to be). Make sure your water-based needle is in the normal position and does not rise quickly. Raise your foot from the accelerator pedal. Check to make sure your BOV is secure. Be sure to know how to slide the clutch. It is very important to know when a turbo car is driving.

Keep in mind: : Low oil pressure, contaminated or contaminated oil, lubrication, block air filters, underwater or collapsing water pipes. Avoid idle idle engine idle. Do not give too much fuel to the engine. Do not stop the hot engine. Incorrectly installed gaskets may also be harmful. Also avoid replacing the engine oil. Always keep the air filter clean and unlimited. Check that the water pipe from the air filter is completely holes. Make sure the plumbing connections are good and tight to prevent leakage. Heat the engine for at least two to five minutes before driving. Leave the engine idling at approx. Stop for 2 minutes.

Source by visit sbobet thailand

Leave a Reply

Your email address will not be published. Required fields are marked *